Martech Analyzer

Parameters of power supply block;

The range of initial voltage: 0,00 – 24,00V
The range of initial electric current: 0,00 – 3,00A
Maximum power: 75W
Stabilization of initial voltage with a rated load: <20mV RMS
Stabilization of initial electric current with a rated load <0.05%
Programmable OverVoltage protection
Programmable OverCurrent protection
Acoustic alerts system

We are official resseler this product

Parameters of battery charger block;
Accumulators serviced: Ni-Cd, Ni-Mh, Li-Ion, Li-Pol, Li-Ta, Pb-bat, RAM, Li-Ph(FePO4)
Quick accumulator test with an internal package resistance measurement
Data export of charging / discharging process (USB)
Charging of Ni-Cd, Ni-Mh: -dV, dT, manual, auto
Charging of Li-Ion, Li-Pol, Li-Ta, Pb-bat, RAM, Li-Ph
Accumulators changing modes: : manual, auto
Accumulators discharging modes: manual, auto
Electric current of charging: 0,10A - 4,00A
Electric current of discharging: 0,10A - 2,00A
Charging/discharging voltage range: 0,6 - 24V
Acoustic alerts system
Temperature measurement and thermal protection of accumulator while charging
Security against accumulator overloading/overcharging
Security against reverse connecting of power supply and the package
Parameters and the device working conditions

Working temperature: from 20C to 40C
Humidity: to 80%

Power voltage: 230VAC/50Hz
Maximum power consumption: 150W
Overloading security: a time-lag fuse

Sizes (width x hight x length): 200 x 80 x 233
Mass: 2,5kg

Security instructions
Don’t use the device in the area of flammable liquids or gases storage.
Don’t let the children paly with the device and keep it out of reach of children.
Store the device in a dry place, out of reach of children while not being use.
You should mind the technical condition of the device at all times.
If you haven’t used the device for some time, before running it,check its condition
and the powering elements potential damage.
If the device has been damaged , do not try to fix it yourself. The device may only
be repaired and serviced by an authorized specialist.

The device has been manufactured according to all safety procedures, to ensure secure and long lasting operating. We state that the device is in accordance with the following regulations defined in European standards and directives:

Typical tests are below, also some screens from Analyzer display :

- Martech Analyzer PB243
- instruction http://martech.pl/download/ANALYZER/Martech_Analyzer_manual_en.pdf
- invoice

You will get SBS activation for free

Notebook Passwords:
- HP FREE
- Compaq FREE
- Dell series D35B ( 12345-D35B) FREE
- Dell series 595B FREE
- Dell series 2A7B FREE
- Laptops based on Phoenix Bios (various models) FREE
- Acer Extensa based on Phoenix ( 5 dec ) FREE
- Fujitsu Siemens (various models, depends on series (Amilo Xi, Pi, L) FREE
- Fujitsu Siemens Series ( 5 x 4 digits ) FREE
- Fujitsu Siemens Series ( 8 hex ) FREE
- Fujitsu Siemens Series ( 5 x 4 hex ) FREE
- Samsung Laptops ( 12 hex ) FREE
- IBM Thinkpad laptops :
A20m, A20p, A21e, A21m, A21p, A22e, A22m, A22p, A30, A30p, A31, A31p
R30, R31, R32, R40, R40e, R50, R50e, R50p, R51, R51e, R52, R60, R60e
R60i, R61, R61e, R61i, R400, R500
X20, X21, X22, X23, X24, X30, X31, X32, X40, X41, X41, x60, X61, X61s, X61 ,
X100e, X200, X200s, X200si, X200, X201, X201i, X201s
X201, X300, X301
T20, T21, T22, T23, T30, T40, T40p, T41, T41p, T42, T42p, T43, T43p,
T60, T61, T61p, T400, T400s, T410, T410i, T410s, T500, T510, T510i,
, Z61e, Z61m, Z61p, Z61t
- Sony PCG(SN)- ,VGN-B, VGN-FS, VGN-S, VGN-T, VGN-TX1, VGN-X FREE

HDD passwords;
- HDD Dell Latitude series D35B (ver1) FREE
- HDD Dell Latitude series D35B (ver2) FREE
- HDD Dell series 595B FREE
- HDD Dell series 2A7B FREE
- HDD Samsung Laptops FREE

Battery model;
- BQ 2040[24C01]
- BQ 2040[24C02]
- BQ 2060[24C01]
- BQ 2060[24C02]
- BQ 2063[24C01]
- BQ 2063[24C02]
- BQ 8011 [24c01]
- 24c046 (toshiba)
- BQ2092/24C01
- PIC16C63A/24C01
- AS355D/S29L394A (SL394) ( IBM ThinkPad T20..23)
- AS358D/S29L394A (SL394)
- AS372D/S29L394A (SL394) (IBM ThinkPad R31 and other models)
- PS331/25LC040