NOKIA 3110

Show IMEI code
* # 06 #
you'll read it on display.

Software Version
This code shows you software version, date of manufacture and hardware model number of your phone. 
* # 3110 #

Show warranty information
To get additional information from your phone you can use the so called 
"warranty codes", try typing: 
*#92702689# (= *#war0anty#).
You will be asked a 'warranty code:' 
type:
6232 (OK) : To display the Month and Year of Manufacture.
7332 (OK) : To display the date of the last repairment.
7832 (OK) : To display (if previously set) the date where the phone was purchased.
9268 (OK) : To display the Serial Number.
37832 (OK) : To set the Purchasing Date MMYY (Warning: You can only do this once)
87267 (OK) : To Confirm Transfer

Sim Clock information
To check if the Sim-Clock can be stopped type: 
*#746025625# (= *#sim0clock#)

Restore factory settings
To restore factory settings 
(This does not include memory, language and counters) type: 
*#7780#

SPLock Mode
If you want to inquire your phone about SPlock, you can use the following: 
# pw + 1234567890 + [y] #
If you put your hands on your 10 digits SPlock code yet, then you can modify the status of the above results, typeing:
# pw + [mastercode] + [y] #
where:
[y] is 1 up to 4, and
any ten digits number seems working instead of "1234567890"

Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked, 
without to know SPLock code !!!!
Give it a try: 
First of all, PIN CODE MUST BE ON, then press:
C
<arrow down>
C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04*<your pin>*<your pin>*your pin>#
Each time you turn your phone OFF it resets the lock, 
so this need to be done each time you'll turn your phone ON
Anyway it's better than nothing, isn't it?

Nokia Cellular Data Suite
Want to use your laptop to send fax and data with your 3110's Nokia Phone ?
Using the Nokia Data Suite you'll be able to do this and much more ...!! 



NOKIA 3210

Show IMEI code
What's the IMEI code of your phone, simply press: 
* # 06 #
you'll read it on display.

Half Rate Codec
Half Rate Codec will decrease sound quality but it gives you about 30% 
lower battery consumption.
You may enable it by this code:* 4720 #
or disable it:# 4720 #

Sim Clock information
To check if the Sim-Clock can be stopped type: 
*#746025625# (= *#sim0clock#)

SPLock Mode
If you want to inquire your phone about SPlock, you can use the following: 
# pw + 1234567890 + [y] #
If you put your hands on your 10 digits SPloock code yet, 
then you can modify the status of the above results, typeing:
# pw + [mastercode] + [y] #
where: 
[y] is 1 up to 4, and
any ten digits number seems working instead of "1234567890"



NOKIA 5110

Show IMEI code
What's the IMEI code of your phone, simply press: 
* # 06 #
you'll read it on display.

Software Version
This code shows you software version, date of manufacture and hardware model number of your phone. 
* # 0000 #

Show Service Menu
To get additional information from your phone you can use the 
so called "warranty code", try typing: 
*#92702689# (= *#war0anty#).
Now you are in service menu where you'll find:
1 IMEI (International Mobile Equipment Identification)
2 Made MM/YY (date of production of the phone mm/yy)
3 Purchasing Date (here you can enter the date of purchase. 
If you enter an incorrect date, you cannot correct it later !
4 Repaired (date of repair, if there was one)
5 Transfer user data?

Enhanched Full rate codec
*3370# EFR will be activated after a reboot of the phone ( consumes more power ) 
#3370# EFR will be switched off after a reboot of the phone.

Half rate codec
*4720# Half Rate coded will be activated after a reboot of the phone ( better standby time ) 
#4720# Half Rate coded will be de-activated after a reboot of the phone

Profiles Menu
If you press the "Power on" 
button for a short moment, the menu with the profiles is shown on the display. 
If you press one more time, 
the mobile turns itself off. 
You can use the up and down cursor keys to scroll and enable a different alert setting.

Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked, 
without to know SPLock code !!!!
Give it a try: 
First of all, PIN CODE MUST BE ON, then press:
C
<arrow down>
C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04*<your pin>*<your pin>*your pin>#
Each time you turn your phone OFF it resets the lock, 
so this need to be done each time you'll turn your phone ON 
Anyway it's better than nothing, isn't it?



NOKIA 6110 / 6150

Show IMEI code
What's the IMEI code of your phone, simply press: 
* # 06 #
you'll read it on display.

Software Version
This code shows you software version, date of manufacture 
and hardware model number of your phone. 
* # 0000 #
if the above won't work, try this one too:
* # 6110 #

Show Service Menu
To get additional information from your phone 
you can use the so called "warranty codes", try typing: 
*#92702689# (= *#war0anty#)
now you can just scroll through the information like in any other menu.
If it won't work and the phone ask you for a 'warranty code:' try:
6232 (OK) : To display the Month and Year of Manufacture.
7332 (OK) : To display the date of the last repairment.
7832 (OK) : To display (if previously set) the date where the phone was purchased.
9268 (OK) : To display the Serial Number.
37832 (OK) : To set the Purchasing Date MMYY (Warning: You can only do this once)
87267 (OK) : To Confirm Transfer

Enhanched Full rate codec
*3370# EFR will be activated after a reboot of the phone ( consumes more power ) 
#3370# EFR will be switched off after a reboot of the phone.

Software Bug
Someone reported us that some Nokia 6110 remain 
dead if you run out of battery while the phone has its keyboard locked. 
Nokia seems to be aware of this bug and 
hopefully will be correct in next software version (6110i maybe ??).

Profiles Menu
If you press the "Power on" 
button for a short moment, the menu with the profiles is shown on the display. 
If you press one more time, the mobile turns itself off. 
You can use the up and down cursor keys to scroll and enable a different alert setting.

Pin Out
1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND


NOKIA 8110 / 8110 i

Show IMEI code
What's the IMEI code of your phone, simply press: 
* # 06 #
you'll read it on display.

Software Version
This code shows you software version, date of manufacture 
and hardware model number of your phone. 
* # 8110 #

Show Service Menu
To get additional information from your phone 
you can use the so called "warranty codes", try typing: 
*#92702689# (= *#war0anty#)
now you can just scroll through the information like in any other menu.
If it won't work and the phone ask you for a 'warranty code:' try:
6232 (OK) : To display the Month and Year of Manufacture.
7332 (OK) : To display the date of the last repairment.
7832 (OK) : To display (if previously set) the date where the phone was purchased.
9268 (OK) : To display the Serial Number.
37832 (OK) : To set the Purchasing Date MMYY (Warning: You can only do this once)
87267 (OK) : To Confirm Transfer

Sim Clock information
To check if the Sim-Clock can be stopped type: 
*#746025625# (= *#sim0clock#)


Pin-Out
Desktop Charger----------------------|
| |
| |
CHARGER--| + TOP OF PHONE -
V V 1 2 3 4 5 6 V 
(o) | | [= = = = = =] | |
7 8 9 10 11 12 
1 - Charger/System Ground
2 - Accessory Output Supply. (3.4V...10V - 50mA)
br> C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04*<your pin>*<your pin>*your pin>#

Each time you turn your phone OFF it resets the lock, so this need to be done each time you'll turn your phone ON 
Anyway it's better than nothing, isn't it?



NOKIA 8810

Show IMEI code
What's the IMEI code of your phone, simply press: 
* # 06 #
you'll read it on display.

Software Version
This code shows you software version, date of manufacture 
and hardware model number of your phone. 
* # 0000 #

Show Service Menu
To get additional information from your phone 
you can use C
<arrow down>
C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04*<your pin>*<your pin>*your pin>#

Each time you turn your phone OFF it resets the lock, so this need to be done each time you'll turn your phone ON 
Anyway it's better than nothing, isn't it?



NOKIA 8810

Show IMEI code
What's the IMEI code of your phone, simply press: 
* # 06 #
you'll read it on display.

Software Version
This code shows you software version, date of manufacture 
and hardware model number of your phone. 
* # 0000 #

Show Service Menu
To get additional information from your phone 
you can use the so called "warranty codes", try >Date of Manufacture
This code shows you the manufacturing date of your Communicator: 
*#3283# (or *#DATE#)



NOKIA 9000

Show IMEI code
What's the IMEI code of your phone, simply press: 
* # 06 #
you'll read it on display.

Software Version
This code shows you software version of your Communicator: 
*#682371158412125#

Date of Manufacture
This code shows you the manufacturing date of your Communicator: 
*#3283# (or *#DATE#)